Q Tech QTA 4040M Mixer Amplifier
The QTA 4040M has been designed as a tabletop mixer amplifier created specifically for small installations where space is limited and a full sized 19 inch amplifier is not available.
This versatile amplifier is complete with the following:
- Microphone input with phantom power available
- Combi Plug for the Mic one input offers flexibility of mic connectors
- Dedicated input for interface for PABX paging
- Adjustable release time for Vox Muting
QTA 4040M Downloads
- QTA 4040M Mixer Amplifier Manual [1.96MB]
| QTA 4040M Product Specifications | |
| Speaker Line Input | 4~16Ω, 70V, 100V |
| Power source | ~220V - 240V 50/60Hz |
| Power consumption | 60W |
| Net weight | 4.0Kg |
| Gross weight | 4.5Kg |
| Dimensions | 320 x 273 x 66mm |
| Amplifier Section (amp in @ 1khz,8ohm Load Output) |
|
| Rated maximum output power (THD 1%) | 40W |
| Input sensitivity/impedance | 1V/20Kohms |
| Frequency response (At 1KHz Half power output) | 80Hz~16KHz (+1dB/-3dB) |
| MIC1~2 input section (MIC in@1Khz, preamp out) |
|
| Input sensitivity/impedance | 5mV/500ohms,unbalance, 2.5mV/500ohms,balance |
| AUX input section (AUX in@1Khz, preamp out) |
|
| Input sensitivity / impedance | 300mV/500ohms |
| TEL input section (AUX in@1Khz, preamp out) |
|
| Input sensitivity / impedance | 1V/500ohms |