QTA 2120P 2 Channel Power Amplifier
The QTA 2120P Power amplifier has been designed for two channel or two zone operation. This is another good idea to save rack real estate for larger multi zone installations.
- 2 x XLR Inputs
- Real mounted level controls for each channel
- Rear mounted switch for selection of 100mV or 1v sensitivity for each channel
- 1/4 in jack balanced outputs
- Each channel may be selected to run in either mono or parallel mode. Rear mounted selector switch
- Separate 24v operation capability on each channel
- Overload, over temperature and speaker short circuit protection
- 3 year replacement warranty
QTA 2120P front
QTA 2120P back
Q Tech QTA 2000 Series Downloads
- Q Tech QTA 2000 Series Catalogue [147kb]
- QTA 2120P QTA 2240P Manual [1.3MB]
| QTA 2120P Product Specifications | |
| Output Power (RMS): | 120W x 2 |
| Power Supply Mains Voltage | AC 115V or 230V 50/60Hz |
| Power Supply Battery Voltage | DC 24V |
| Total Harmonic Distortion | <= 1% @ 1KHz, rated power |
| Sensitivity | XLR, Phone Jack (balanced) 1v @ 10K ohm |
| Outputs | 8Ω, 70V, 100V |
| Signal to Noise Ratio4 | 86 dB |
| Indicator | Power On, Level |
| AC Power Consumption | 320W |
| DC Power Consumption | 8A |
| Dimensions (mm) | 88(H) x 425(W) x 305(D) |
| Weight | 13 Kgs |
| Mounting options | Table top or 19” rack mountable |